Paint Flake Epoxy Floor Coating

Epoxy Paint Flake Floor Coating

iREPAINT is Volusia Counties finest Painting Contractor.  We Specialize in painting, repainting and pressure washing.  We also install epoxy floor coating systems that are durable and beautiful.  We can truly tranform the image of your home or business from the ground up.  This webpage is designed to help you choose if this floor coating is right for your home or place of business.  It is economical when compared to wood or tile and durable enough to be used in your garage.  Please read on to learn how to install an epoxy floor coating system.  

Bare and Ugly to 

To multi colored and classy

We always prepare our floors by pressure washing with a hydro scrubber at 4ooo psi.  This gives us a clean and sound surface for our new coatings.

Then we patch surface cracks with a polyurethane caulking.  After our concrete floor has been cleaned and the cracks have been filled we are ready to begin coating the floor.   The floor in the following picture is bare and free from all sealers, oil build up or debris.  This is the perfectly prepared surface for this project.  This Project is located in Daytona Beach Florida.  

We apply our epoxy coating by brushing in to our edges and rolling out the large areas with a 1/2 inch roller nap.  We make sure to apply a even layer of paint to the floor.  Once we have a section approx 100 square foot ready with wet paint we use  metal spikes shoes (similar to golf cleats) to walk into the wet paint and broadcast our paint flakes.  You can choose a manufactured blend of paint flakes or design your own.

iREPAINT custom matched the paint flakes on this project.  Using a 4 Part Cream, with a 2 Part maroon and a 1 part black.  Once the coating has fully hardened we use a stiff bristled broom to sweep excess chips and vacuum up all loose paint flake debris.  Once cleaned we cut and roll on two full coats of clear epoxy with a semi-gloss finish.  

This floor surely sparkles and leaves a non skid texture.  This Epoxy Floor coating is durable enough to handle the toughest environments, from janitors closets to restaurants.

We can also blend in metallic flakes for a dramatic look.  The metal flakes blended with the epoxy coating adds a high gloss finish and by blending  3 or 4 colors you can achieve the look of a polished marble or granite floor.  Check out these pics of  metallic epoxy floor coatings.  

Call iREPAINT today for your free estimate. 386-416-8861

We Paint Volusia County

Edgewater Painter, New Smyrna Beach Painter, Port Orange Painter,       South Daytona Painter, Daytona Beach Painter, Holly Hill Painter, Ponce Inlet Painter, Daytona Beach Shores Painter, Ormond Beach Painter, Ormond By the Sea Painter, Pierson Painter, Deleon Springs Painter, Deland Painter, Lake Helen Painter, Debary Painter, Orange City Painter, Deltona Painter, Oak Hill Painter, Osteen Painter