Rust-Oleum Mirror Effect Paint

ABOUT MIRROR EFFECT

Mirror Effect Paint is a unique coating that is applied to the reverse side of glass or acrylic glass to create a reflective mirror like finish. It is great for glass vases, jars, framed glass, table tops, candle holders and more.  Mirror Effect Paint is manufactured by Rust-Oleum a trusted company who has been manufacturing paint since 1921.

This specialty paint has been developed for ease of use and packaged in a 6 ounce aerosol spray can.  This special effect paint is perfect for your craft project or as an accent in your home.  Try it today, you can not go wrong with high quality paints developed by Rust-Oleum.

FOR BEST RESULTS

Ensure that the glass is clean by using a glass cleaner or soap and water with a micro fiber cloth. Apply using very thin coats, allowing the paint to dry for 1 minute between coats. Apply up to 5 coats to achieve the desired mirror effect. For added protection, apply a thin coat of Rust-Oleum® Ultra Cover 2X Matte Clear or for added reflectivity, apply a thin coat of Rust-Oleum® Ultra Cover Flat Black to the painted side.

SURFACE PREPARATION

Remove water spots and other imperfections on substrate to achieve optimal results. Clean glass thoroughly with glass cleaner or soap and water, using a lint free cloth. Allow glass to dry completely before painting. Coating will not hide imperfections on substrate

Application

Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Make sure to apply paint to the reverse side of glass that will be displayed. Hold can upright 10-12” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Apply using very thin coats, allowing the paint to dry for 1 minute between coats. Apply up to 5 coats to achieve the desired mirror effect. Paint will rapidly change in appearance and mirror effect will appear while coating dries. The painted side will appear dull with the reverse side showing

DRY & RECOAT

Dry and recoat times are based on 70ºF and 50% relative humidity. Dries completely in 5-10 minutes. May be recoated at any time. For added protection, apply a thin coat of Rust-Oleum Matte Clear (267028) or Stops Rust® 7776830 Flat Black to the painted side.

CLEAN-UP

Wipe off tip before storing. Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in home trash compactor.

CLOGGING

If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening. 

We Paint Volusia County

Edgewater Painter, New Smyrna Beach Painter, Port Orange Painter,       South Daytona Painter, Daytona Beach Painter, Holly Hill Painter, Ponce Inlet Painter, Daytona Beach Shores Painter, Ormond Beach Painter, Ormond By the Sea Painter, Pierson Painter, Deleon Springs Painter, Deland Painter, Lake Helen Painter, Debary Painter, Orange City Painter, Deltona Painter, Oak Hill Painter, Osteen Painter